Eco Friendly Lakeland Logs

Why Burn Logs?

Wood burning stoves can be very efficient

Click on any image to enlarge it

Wood was the traditional fuel in the UK until the industrial revolution. It has been replaced by coal, oil and gas over the last two hundred years. Our increasing awareness of the environmental damage caused by fossil fuels has led to growing interest in using wood as a sustainable, renewable, low carbon alternative.

Wood is a major source of renewable heat energy and, burned efficiently, it produces virtually no smoke. As trees grow they absorb carbon dioxide (CO2), incorporating the carbon into new growth and returning oxygen to the atmosphere. When the wood is burned this carbon is oxidised and released as CO2. As a result, using wood from sustainably managed trees reduces net CO2 production (small amounts are released by the activities of processing and transportation) compared to using fossil fuels. This means that heating using wood can significantly reduce our reliance on fossil fuels while also reducing our CO2 emissions.

The woodland area in Britain is limited, but with effective management, a substantial quantity of wood is available from forestry which is not suitable for construction and other uses. Managing woodland improves biodiversity and increasing the proportion of managed woodland supports jobs in the forestry industry.

When choosing wood for burning there are two significant factors which have an effect on the net calorific value (CV) or the amount of available heat per unit (volume) of fuel:
1. Moisture Content
2. Wood Density

1. The Moisture Content of wood has the greatest effect on net Calorific Value (CV). Any water in the timber has to evaporate before the wood will burn, and this will reduce the net energy released as useful heat (as opposed to steam up the chimney). Logs that aren’t dry will result in a fire that smoulders and creates lots of tars and smoke. These tars can be corrosive, potentially damaging the lining of the flue and increasing the danger of a chimney fire. Wet logs will tend to blacken glass in stoves even if the stove is designed to keep the glass clean. Well seasoned logs can have approximately twice the CV of green logs.

Always burn dried (seasoned) wood. Radial cracks and bark that comes off easily are signs of well-seasoned wood.

Moisture content has an important effect on how well logs burn

2. The Wood Density
When buying logs, it is common for the seller to let you know whether they are from hardwood or softwood tree species (or mixed). The general difference is that hardwoods (deciduous, broadleaved tree species) tend to be denser than softwoods (evergreen, coniferous species). This means that a tonne of hardwood logs will occupy a smaller space than a tonne of softwood logs. Dense woods will burn for longer than less dense woods, this means you will need fewer ‘top ups’ to keep a log stove burning. If you buy wood by volume you will receive more kilowatt hours (kWh) of heat from a cubic metre (m3) of hardwood than softwood (at the same moisture content). Softwoods are easier to light and often cheaper to buy however.

Tel:- 01768 895204